• Phone : (+62(21) 39837477) – SMS/WA : (+628128034 1963, +6281 86 185 81)

  • English EN Indonesian ID

Safety Integrity Level Training

Safety Integrity Level Training by handaltraining.

Safety Integrity Level Training for Online Training, 19-20 March  2021, Investment is IDR 3.500.000,-/participant

FOREWORD

A Safety Integrity Level Training (SIL) is determined as a relative level of risk reduction and mitigation provided by a safety function, or to indicate a target level of risk reduction and mitigation. In simple terms, SIL is a measurement of performance required for a safety instrumented function (SIF). The requirements for a define SIL are not consistent with all of the functional safety standards. In the functional safety standards based on the IEC 61508 standard, four SILs are determined, with SIL 4 the most dependable and SIL 1 the least.

An assignment of SIL is an exercise in risk analysis where the risk associated with a specific hazard, that is calculated to be protected against by a SIF, is determined without the beneficial risk devaluation effect of the SIF. The risk come up and unmitigated risk is then compared against a tolerable risk target. The difference between the unmitigated risk and the tolerable risk, if the unmitigated risk is higher than tolerable, must be addressed through risk reduction of the SIF. This amount of required risk reduction is correlated with the SIL target. In essence, each order of magnitude of risk reduction that is required correlates with an increase in one of the required SIL numbers.

The International Electro technical Commission (IEC) provides an IEC61508 & IEC 61511 standard. These codes are established rules of the design, and selection of safety instrumented systems (SIS), they are the statistical representations of the reliability on the particular functions when a process demand occurs. The objective of the rules is to provide a margin for SILs in service, such as; SIL 1, 2, 3, and 4. This course will centres on the on the practical aspects of SIL and the methodologies used for determining SILs that are include but are not limited to; LOPA, Safety layer, FTA and also discuss an overview various steps for assignment of target SIL

THE PARTICIPANTS

The Safety Integrity Level Training in Indonesia will be of benefit to engineering and technical personnel employed process industries, power, oil and gas, being of direct relevance to engineers involved in the provision and operation who work closely and responsible to SIS.

OBJECTIVE

The Safety Integrity Level Training  On Successful completion of this module the participant will be able to:

  1. Learn the core concepts of fundamental SIL & application in industry
  2. Understand how to modify & improve the existing control system without avoid the safety and business aspects.
  3. Learn how implement the tools of SIL based upon the IEC and the other standard a basic to control production program
  4. Be able to measure the reliability of SIS outcomes

 

COURSE OUTLINE

  1. Introduction to Safety Instrumented Systems
  2. The Safety Life Cycle – IEC61508
  3. IEC 61511 and the other applicable standards
  4. Risk Management & Reliability
  5. Process Hazard Analysis
  6. Layer of Protection Analysis
  7. Safety Integrity Level selection
  8. Probability of Failure Demand
  9. Hardware Fault Tolerance
  10. Case Study

 

INSTRUCTOR

Handal Consulting & Training Team

COURSE FEES

The SIL(Safety Integrity Level) training fee is Rp. 5.750.000,- /delegate and including; lunch, training kit, 2 x Coffee break/day, Course certificate, excluding accommodation and Tax.

Training Nebosh Indonesia Profesional dan Berpengalaman

DATES & VENUE:

  • DATES :  19-20 March 2021
  • TIME : 8.00 am – 4.00 pm
  • VENUE: JAKARTA

Safety Integrity Level Training In-House Training 2020

Safety Integrity Level Training In-House Training 2020
Safety Integrity Level Training In-House Training 2020

SIL(Safety Integrity Level) Training in Bandung, 2019

SIL(Safety Integrity Level) Training in Bandung, 2019
SIL(Safety Integrity Level) Training in Bandung, 2019

Safety Integrity Level, 1st Batch, December 2019 in PETRONAS

Safety Integrity Level, 1st Batch, December 2019 in PETRONAS
Safety Integrity Level, 1st Batch, December 2019 in PETRONAS

Safety Integrity Level, 2nd Batch, December 2019 in PETRONAS

Safety Integrity Level, 2nd Batch, December 2019 in PETRONAS
Safety Integrity Level, 2nd Batch, December 2019 in PETRONAS

INFORMATION & REGISTRATION:

Please Contact us

  • Handal Consulting & Training
  • Graha Tirtadi, Jl. Raden Saleh No. 20
  • Cikini – Jakarta Pusat 10330
  • E-mail : info@handaltraining.com
  • Telepon : 021 – 3983 7475
  • Fax : 021 – 3983 7477
  • WA/SMS : 0812-80341963, 08186 18581